BRAYER BR1108, Instruction Manual, Page: 10 / 80

10 EN
be flashing. One segment « » of the coffee brewing
strength symbol will glow constantly.
• Current time digital symbols (32) «12:00» and the
symbol (34) «CLOCK» will be flashing for 5 seconds,
and you can set the current time.
• Set the current time in «hours» by pressing the
button (28) «HOURS». The time format is 12 hours.
The symbols (31) show the current time before noon
«AM» and after noon «PM».
• Set the current time in «minutes» by pressing the
button (27) «MINUTES». The digital symbols (32) will
show the current time.
• After setting the current time, the coffee maker will
return to standby mode, while the display will show
the current time (32), the symbol (31) «AM or PM»
and the coffee brewing strength symbol «
».
MAKING COFFEE IN THE DRIP COFFEE MAKER
• Open the lid (12) of the water tank (15) of the drip
coffee maker and fill the tank with drinking water. Do
not exceed the maximal water level mark! Close the
lid (12).
• Open the lid (11) and install the reusable filter (13)
in the filter holder (14). The drip coffee maker is
intended for making 10 cups of coffee. For this, you’ll
need about 60 g of ground coffee.
• Measure the required amount of ground coffee and
put it into the filter (13). 6 grams of ground coffee
per one coffee cup is required on average; adjust the
quantity according to your taste.
• Make sure that the filter holder (14) is installed properly,
otherwise the lid (11) will not close.
• Close the lid (11).
• Place the flask (18) on the tray (20), make sure that the
center of the flask (18) lid matches the anti-drip valve.
• Plug the unit in. You will hear a sound signal, and for
2 seconds all symbols will appear on the display. After
that the symbol (34) «CLOCK» will start flashing, the
symbol (31) «AM» will appear, the digital symbols (32)
will show the time «12:00». The separating dots (33) will
be flashing. One segment « » of the coffee brewing
strength symbol will glow constantly. If necessary, you
can set the current time (see the chapter «CURRENT
TIME SETTING»).
• To switch the coffee maker on, press the button (30)
«COFFEE ON/OFF», the button (30) will light up, the
coffee maker will be switched on and the ready coffee will
flow into the flask (18).
ATTENTION! Water passes through ground coffee under
steam pressure, so do not bend over the coffee maker, do
not open the lid (11) and do not remove the filter (13) or the
filter holder (14).
Note: - during thew coffee maker operation only the button
(30) «COFFEE ON/OFF» is active.
• When coffee is ready, you will hear 3 sound signals, the
coffee maker will switch to the keep warm mode, the