BRAYER BR1108, Instruction Manual, Page: 3 / 80

3 EN
EN
ESPRESSO MACHINE BR1108
Two coffee makers are combined in one appliance:
- coffee maker for making espresso and cappuccino
and drip coffee maker.
DESCRIPTION
1. Tray filling pop-up indicator
2. Drip tray with a grid for cups
3. Filter holder handle
4. Filter holder
5. Cappuccinator pipe tip
6. Cappuccinator pipe
7. Steam supply control knob « »
8. Cup warming tray
9. Water tank
10. Water tank lid
11. Drip coffee maker lid
12. Drip coffee maker water tank lid
13. Reusable coffee filter
14. Reusable filter holder
15. Drip coffee maker water tank
16. Display and control buttons
17. Coffee maker body
18. Ready coffee flask
19. Flask handle
20. Flask installation/flask warming tray
21. Filters for making espresso or cappuccino coffee.
22. Measuring spoon with ground coffee tamper
Control panel and display
23. «POWER» on/off button
24. Steam supply/preheating button «STEAM
PREHEAT»
25. One cup making button « »
26. Two cups making button « »
27. Current time setting button «MINUTES»
28. Current time setting button «HOURS»
29. PROGRAMM setting button «PROGRAMM»
30. Drip coffee maker on button «COFFEE ON/OFF»
31. Current time am/pm symbols «АМ/РМ»
32. Current time/PROGRAMMming time digital
symbols
33. Separating dots
34. Time symbol «CLOCK»
35. Coffee maker cleaning symbol «CLEAN»
36. PROGRAMMming symbol «PROGRAMM»
37. Sound signal on symbol « »
38. Coffee brewing strength for the drip coffee maker
«STRENGTH»
39. Coffee brewing strength symbol « »
40. «Strong» coffee symbol « »
41. Keep warm mode symbol «TIME SINCE BREW»
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal operation
current not exceeding 30 mA, to install RCD, contact
a specialist.