BRAYER BR1108, Instruction Manual, Page: 16 / 80

16 EN
• The outgoing steam creates whirls which froths milk;
from time to time lift and lower the bowl with milk
against the tip (7) to make the milk foam.
• Making the milk foam is an art. You may not make it
at the first try, don’t worry and experiment until you
achieve good results.
• When you froth milk, you can remove the tip (5)
and try frothing milk directly with the steam from the
cappuccinator pipe (6).
• Close the steam supply by turning the knob (7) « »
clockwise until bumping.
• Switch the steam supply off by pressing the steam
supply button (24) «STEAM PREHEAT» again.
• Add frothed milk to the ready espresso, and the
cappuccino is ready. You can decorate the milk foam
with confectionery sugar and cocoa powder.
• Right after making frothed milk clean the tip (5) - to
do this, put the tip (5) into a glass of water, switch the
steam supply on by pressing the button (24) «STEAM
PREHEAT» and turn the steam supply knob (7) «
» counterclockwise to release some steam. After that
close the steam supply by turning the knob (7) « »
clockwise until bumping and switch the steam supply
off by pressing the steam supply button (24) «STEAM
PREHEAT».
• Switch the coffee maker off by pressing the button (23)
«ON».
• Wait until the coffee maker cools down and remove
the tip (5) from the cappuccinator pipe (6), wipe the
cappuccinator pipe (46) with a soft damp cloth and wash
the tip (5) under a water jet.
Notes:
- if you want to make espresso right after making
cappuccino, you need to reduce the water temperature
in the boiler;
- place an empty cup on the grid (2). If the filter holder
(4) and the filter (21) are not installed, install the filter
holder (4) into the coffee maker, do not add ground
coffee in the filter (21);
- install the filter holder (4) in the coffee maker, the filter
holder (4) ledges should match the grooves on the
boiler. After that turn the filter holder (4) handle (3) to
the right until bumping;
- switch the water supply on by pressing the button (26)
« », if necessary, press the button (26) « »
again. The coffee maker is ready to make espresso.
- to reduce the temperature of the water in the coffee
maker boiler, after making the cappuccino you can
pause for 5-10 minutes, which is necessary to cool the
water in the coffee maker boiler.
WARMING THE DRINKS
• You can warm up ready drinks by putting the
cappuccinator pipe (6) without the tip (5) into the cup with
the drink.
• If the filter holder (4) and the filter (21) are not installed,
install the filter holder into the coffee maker. Do not add
ground coffee in the filter (21).