BRAYER BR1108, Instruction Manual, Page: 14 / 80

14 EN
After that turn the filter holder (4) handle (3) to the right
until bumping.
• Place the cup on the tray grid (2).
• Plug the unit in. You will hear a sound signal, and for
2 seconds all symbols will appear on the display. After
that the symbol (34) «CLOCK» will start flashing, the
symbol (31) «AM» will appear, the digital symbols
(32) will show the time «12:00». The separating
dots (33) will be flashing. One segment « » of the
coffee brewing strength symbol will glow constantly.
If necessary, you can set the current time (see the
chapter «CURRENT TIME SETTING»).
• To switch the espresso coffee maker on, press the
button (23) «ON», the button (23) «ON» and (24)
«STEAM PREHEAT» indicators will glow constantly,
and the button (25) « » and (26) « » indicators
will be flashing.
• After preheating the button (25) « » and (26) « »
indicators will glow constantly.
Note: during preheating you can warm up the cups for
coffee by placing them on the tray (8).
• If you installed the small filter (21), press the button (25)
« ». If you installed the big filter (21), press the button
(26) « ». The button (25 or 26) lighting will light up
and start flashing, the ready coffee will be poured into
the cup.
• After the coffee has been poured into the cup, the water
supply will be switched off and the buttons (23, 24, 25,
26) illumination lights up.
• Switch the coffee maker off by pressing the button (23)
«ON» and remove the cup of coffee from the tray (2) grid.
• Always switch the coffee maker off and unplug it when you
don’t use it.
• Wait until the coffee maker cools down and remove the
filter holder (4) by turning it to the left.
• Remove the installed filter (21) and clean it from the
remaining ground coffee.
• Wash the filter (21) and the filter holder (4) under running
water and dry them.
Notes:
- If you need to promptly remove the filter holder (4),
you have to reduce the pressure in the boiler, switch
the coffee maker off by pressing the on/off button
(23) «ON», place a suitable cup under the tip (5) and
slightly open the steam supply by turning the knob (7)
« » counterclockwise. After the pressure in the boiler is
released, you can remove the filter holder (4).
- successive making of coffee should be performed with
an at least 3-5 min interval.
- during the operation of the espresso coffee maker you
can also use the drip coffee maker.
ESPRESSO PORTION SETTING
• Install the small filter (21) and add ground coffee into it.
When making the espresso, press and hold the button
(25) « », the one cup button (25) « » indicator will
be flashing. When the desired amount of espresso is