BRAYER BR1108, Instruction Manual, Page: 11 / 80

11 EN
symbol (41) «TIME SINCE BREW» will light up on the
display and the display lighting will go out. The keep
warm time is 30 minutes.
Note:
you can at any time remove the flask (18) and pour
coffee, while the anti-drip filter will be on. Do not exceed
the time the flask (18) is out for more than 30 seconds.
SETTING THE «INTENSITY» OF COFFEE BREWING
• To set the «intensity» of brewing coffee, press and
hold the button (29) «PROGRAMM» for 3 seconds, the
display will show the current time with the symbols (31)
«PM» or «AM» and the symbol (38) «STRENGTH» will
flash. Press the button «PROGRAMM» again to set
the «intensity» of coffee brewing, the intensity will be
shown by the symbols (39) « », « », « » and the
symbol for «strong» coffee (49) « ». After you set
the «intensity» of coffee brewing, the selected symbol
will be continuously flashing for 5 seconds to confirm,
and after that the coffee maker will return to the standby
mode.
SETTING THE AUTOMATIC SWITCH ON TIME FOR
THE DRIP COFFEE MAKER
• Plug the unit in and set the current time (see the
chapter «CURRENT TIME SETTING»).
• Make sure that the current time is set correctly.
• To set the switch on time for the drip coffee maker,
press the button (29) «PROGRAMM», the button (29)
indicator will light up, the display will show the symbols
(36) «PROGRAMM», the symbols (31) «AM», the
digital symbols (32) will be flashing, the symbol (38)
«STRENGTH» will glow constantly.
• Set the current time in «hours» by pressing the button
(28) «HOURS». The time format is 12 hours. The
symbols (31) show the current time before noon «AM»
and after noon «PM».
• Set the current time in «minutes» by pressing the button
(27) «MINUTES». The digital symbols (32) will show the
current time.
• Confirm the set switching on time of the drip coffee
maker by pressing the button (29) «PROGRAMM».
• If you have not confirmed the set switching on time
of the the coffee maker by pressing the button (29)
«PROGRAMM», the digital symbols (32) will be flashing
for 5 seconds, and the coffee maker will return to the
standby mode.
• To cancel the switching on time of the drip coffee
maker, press the button (29) «PROGRAMM». the
button (29) indicator will go out, and the symbol (36)
«PROGRAMM» on the display will go out.
Note: after the automatic switch on of the drip coffee
maker, you can press the button (23) «ON» to switch to
the «espresso» or «cappuccino» coffee making mode.