BRAYER BR1108, Instruction Manual, Page: 13 / 80

13 EN
• Insert one of the coffee filters (21) into the holder (4), do
not add ground coffee into the filter (21).
• Install the filter holder (4) into the coffee maker. The
filter holder (4) ledges should match the grooves on the
boiler. After that turn the filter holder (4) handle (3) to
the right until bumping.
• Place the cup on the tray grid (2).
• Plug the unit in. You will hear a sound signal, and for
2 seconds all symbols will appear on the display. After
that the symbol (34) «CLOCK» will start flashing, the
symbol (31) «AM» will appear, the digital symbols
(32) will show the time «12:00». The separating
dots (33) will be flashing. One segment « » of the
coffee brewing strength symbol will glow constantly.
If necessary, you can set the current time (see the
chapter «CURRENT TIME SETTING»).
• To switch the espresso coffee maker on, press the
button (23) «ON», the button (23) «ON» and (24)
«STEAM PREHEAT» indicators will glow constantly,
and the button (25) « » and (26) « » indicators
will be flashing.
• After preheating the button (25) « » and (26) « »
indicators will glow constantly.
• Press the button (26) « », the button (26) « »
lighting will light up and start flashing, the water will be
pouring into the cup. Depending on the capacity of the
cup, press the button (26) « « several times.
• Switch the coffee maker off by pressing the button
(23) «ON», remove the full cup from the tray (2) grid
and pour the water out. The coffee maker is ready for
operation.
• Always switch the coffee maker off and unplug it when you
don’t use it.
MAKING ESPRESSO
How to make good espresso
- Use ground coffee for espresso coffee makers.
- Slightly tamp the ground coffee in the filter (21), you can
do it with the back side of the measuring spoon (22).
- Coffee strength depends on the quality and grinding
degree of coffee beans. If coffee is pouring out too long,
this means the coffee powder is too fine or it is tamped
too strongly.
• Make sure that the steam supply is closed. To do this turn
the knob (7) « » clockwise until bumping.
• Open the lid (10) of the water tank (9) and fill the tank (9)
with cold water up to maximal level.
• Insert one of the coffee filters (21) into the holder (4) and
add ground coffee in the filter (21) with the measuring
spoon (22). Slightly tamp the ground coffee with the back
side of the measuring spoon (22).
• To make one cup of espresso use the small filter (21) and
press the button (25) « ». To make double portion of
espresso use the big filter (21) and press the button (26)
« ».
• Install the filter holder (4) into the coffee maker. The filter
holder (4) ledges should match the grooves on the boiler.