Braun Aesculap TSPACE PEEK, Instructions For Use/Technical Description

Page: 7 / 266

5
Fig. 2 Coupling the trial implant to the insertion
instrument
Note
The switch 2 can only be turned when the rod is in the
front position and the pin 5 is fully visible in the switch.
►
Turn the switch 2 to the right ( direction), see
Fig. 3.
Fig. 3 Close-up view of the insertion instrument,
switch closed
►
Hold the trial implant D at 0° position on the inser-
tion instrument A , see Fig. 8.
►
Turn the rotary nut 3 on the insertion instrument A
clockwise (“fix” direction) until the trial implant is
clamped, see Fig. 4.
Fig. 4 Close-up view of the insertion instrument,
trial implant/implant clamped
►
Check manually that the trial implant is securely in
place.
Inserting the trial implant
►
Insert the trial implant D with the insertion
instrument 1 straight (0° position) into the pre-
pared implant bed. To do so, carefully hit with a
hammer on the impact surface of the rotary nut
3 .
►
To turn the trial implant D :
– Gently turn the rotary nut 3 counterclockwise
(“loosen” direction). When doing so, make cer-
tain that the pin
5 remains outside of the
switch 2 .
– Impact the trial implant D further with the
hammer until the required end position is
reached.
►
Check the position of the trial implant D using
intraoperative X-ray control.
D
7 A
2 3 5
3 2 5