Braun Aesculap TSPACE PEEK, Instructions For Use/Technical Description

Page: 12 / 266

10
Aesculap ®
TSPACE PEEK/TSPACE
XP
instruments
Preparations at the place of use
►
If applicable, rinse non-visible surfaces preferably
with deionized water, with a disposable syringe for
example.
►
Remove any visible surgical residues to the extent
possible with a damp, lint-free cloth.
►
Transport the dry product in a sealed waste con-
tainer for cleaning and disinfection within 6 hours.
Preparation before cleaning
►
Dismantle the product prior to cleaning, see Disas-
sembling.
►
For mechanical cleaning: Mount the irrigation
connector
4 to the rear end of the rotary nut 3 .
Cleaning/disinfection
Product-specific safety notes on the repro-
cessing procedure
►
Use suitable cleaning/disinfecting agents if the
product is put away in a wet condition. To prevent
foam formation and reduced effectiveness of the
process chemicals: Prior to mechanical cleaning
and disinfection, rinse the product thoroughly with
running water.
►
In case of bone or tissue residues on the product:
Pre-clean the product manually with a brush.
CAUTION
Damage to the product due to
inappropriate cleaning/disin-
fecting agents and/or exces-
sive temperatures!
►
Use cleaning and disinfect-
ing agents according to the
manufacturer’s instruc-
tions which
–
are approved for plastic
material and high-
grade steel,
–
do not attack softeners
(e.g. in silicone).
►
Observe specifications
regarding concentration,
temperature and exposure
time.
►
Do not exceed the maxi-
mum permitted cleaning
temperature of 96 °C.