Braun 0871 3050, Service Manual

Page: 83 / 136

Disassembly / Assembly
3
Infusomat® Space 6.0 3 - 37 EN
3.13 Processor PCB
Designation Order No.
Processor PCB ISP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3452 1348
(incl. connectors)
Connector P2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3477 4355
Connector P3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3477 4359
Connector seal P2 and P3 SP (inside). . . . . . . . . . . . . . 3477 4357
Bottom inner frame ISP . . . . . . . . . . . . . . . . . . . . . . . . 3452 1453
EMC plate ISP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3452 1440
Rating plate ISP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . On request
Screws
(see „Service Parts and Screw Kit“ ➨ pg. 3 - 7)
Note
Please pay attention to the corresponding notes during assembly
and installation
(see „Processor PCB“
➨
pg. 3 - 41) .
Disassembly
1. Loosen two hexagon nuts ( Fig.: 3 - 38 / Item 1 ) and remove
the nuts with the toothed locked washers ( Fig.: 3 - 38 /
Item 2 ), the distance sleeve ( Fig.: 3 - 38 / Item 10 ) and the
countersunk screw.
2. Remove the processor PCB ( Fig.: 3 - 38 / Item 5 ) from the
bottom inner frame.
3. Loosen one hexagon nut and remove the nut together with
the EMC shield ( Fig.: 3 - 38 / Item 8 ) and the screw ( Fig.: 3 -
38 / Item 7 ) from the bottom inner frame ( Fig.: 3 - 38 /
Item 6 ) .
Fig.: 3 - 38
Legend of fig. 3 - 38:
Item Designation
1 Hexagon nut M3
2 Toothed locked washer M3
3 Connector P2
4 Connector P3
5 Processor PCB
6 Bottom inner frame
7 Fillister head screw M3x10
8 EMC plate
9 Countersunk screw M3x12 A2 TORX (not depicted)
10 Distance sleeve
1
2
5
6
8
10
1
7
3
4