Braun 0871 3050, Service Manual

Page: 68 / 136

Disassembly / Assembly
3
3 - 22 Infusomat® Space 6.0 EN
3.8 Housing Bottom Part
Designation Order No.
Loudspeaker SP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3452 0937
Housing bottom part ISP . . . . . . . . . . . . . . . . . . . . . . . 3452 1305
Rating plate ISP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . On request
Snap-in hook SP with leaf spring
(see „Service Parts and Screw Kit“
➨
pg. 3 - 7)
Screws and cover caps
(see „Service Parts and Screw Kit“ ➨ pg. 3 - 7)
Note
Please pay attention to the corresponding notes during assembly
and installation
(see „Housing Bottom Part“ ➨ pg. 3 - 45) .
Disassembly
1. Remove the drop sensor connector (not depicted) from the
housing bottom part ( Fig.: 3 - 21 / Item 3 ).
Note
The drop sensor connector is integrated in the processor PCB.
2. Pierce four cover caps ( Fig.: 3 - 21 / Item 5 ) with a small
screwdriver and pry the cover caps out.
3. Unscrew three screws ( Fig.: 3 - 21 / Item 6 ) and one screw
( Fig.: 3 - 21 / Item 4 ).
4. Take off the housing bottom part.
5. Pull the loudspeaker connector off (
Fig.: 3 - 21 / Item 2 ) the
processor PCB and remove the loudspeaker.
6. Pull the snap-in hook ( Fig.: 3 - 21 / Item 1 ) out of the housing
bottom part. Fig.: 3 - 21
Legend of fig. 3 - 21:
Item Designation
1 Snap-in hook
2 Loudspeaker
3 Housing bottom part
4 Screw DELTA PT 30x12 WN 5452 A2 TORX plus 10IP
5 Cover cap
6 Screw DELTA PT 30x8 WN 5452 A2 TORX plus 10IP
3
4
6
5
1
2