Cable H05VVF - T105
or H05V2V2F - T90
Cross section of
conductors in mm2
Fuse
220-240 V
~
- 50 Hz
All-gas
3 conductors of
which 1 is to be
earthed
1
5 A
9
Installing your hob in all simplicity
E
lectrical connections
C
ROSS SECTION OF THE CABLE TO USE
Your hob is delivered with a three-
conductor (phase + neutral)
H05VVF- T105 or H05V2V2F - T90
1mm² section cable, which must be
connected to a 220-240 V
~
single pha-
se mains supply by the intermediary of
a two phase + earth CEI 60083 stan-
dardised neutral plug, or a single pole
cut-off device with a contact opening
by at least 3,5mm.
In HONG KONG, you must use 3-pin
plug that comply with the relevant
safety standard BS 546.
The mains plug must be accessible af-
ter installation.
The protective conductor (green/yellow) is connected to the
earth
connection on the hob and therefore must also be connected to an external
earth connection
.
If the power supply cable is damaged, it must be replaced with a cable or a spe-
cial unit available from the manufacturer or his After Sales Service.
Summary of Contents for TG1120B
Page 1: ...EN GUIDE FOR INSTALLATION AND USE Cooking hob...
Page 19: ...19...
