Brandt TG1120B, Manual For Installation And Use

Page: 8 / 20

Installing your hob in all simplicity
- Place the hob in position in the cutout
on the worktop, pulling it forward as far
as possible.
- Put the burners, caps and pan grates
back in position.
- Connect the hob power supply cable
to the electrical installation of the kit-
chen. (See "
Electrical connections " ).
- Connect the hob to the gas.
If you wish you can lock the hob into
position using attachments that come
with screws (see picture opposite) and
are secured to the corners of the
housing.
Only use the holes provided.
Stop screwing when the lug starts
to bend.
Do not use a power screwdriver.
8
F
itting recommendations (cont'd)
Fixing
lugs
Worktop
Holes for fixing