Brandt TG1120B, Manual For Installation And Use

Page: 12 / 20

12
Spanner
Spanner
Line
Line
Fig. 3 Fig. 2
Grill
Cover
Head
Dish
Upper side of the hob
Fig. 1
Installing your hob in all simplicity
C
hanging the type of gas
When carrying out this operation, you
should successively:
➊
Change the injectors
❷
Adjust the retarder on the taps
➊
C
HANGE THE INJECTORS
in the following
way:
• Remove the supports, and all the bur-
ner caps and heads.
• Using the spanner supplied, unscrew
the injectors at the bottom of each dish
and remove them
(fig 1) .
- Replace these with the injectors
supplied in the wallet, in accordan-
ce with the gas rating table at the
end of the chapter; to do this:
➪
Screw in the injectors by hand un-
til they are tight.
➪
Put the spanner well onto the in-
jector.
➪
With a pencil draw a line on the
hearth plate as indicated (fig. 2) .
➪
Turn the spanner clockwise until
the line appears on the other side
(fig. 3) . Warning! Do not go
beyond this limit as you are
liable to cause damage.
➪
Put the burner heads, covers and
pan supports back in position.