Brandt TG1120B, Manual For Installation And Use

Page: 6 / 20

Installing your hob in all simplicity
W
hat your hob looks like?
6
Width
Depth
Height
Standard cutout 26,5 cm 48 cm 5.1 cm
Outside
dimensions above
the work surface
31 cm
51 cm 5 cm
Outside
dimensions below
the work surface
26 cm
47 cm
5.1 cm
① ①
Semi-fast burner
1.60 kW*
② ②
Extra-fast burner
3.00 kW*
(*Powers in Hong Kong
town gas)
② ②
① ①
F
itting recommendations
This appliance should be installed by
a qualified technician / installer.
Prior to installation, ensure that the
local distribution conditions (nature
of the gas and gas pressure) and the
adjustment conditions of the
appliance are compatible.
This appliance must be installed and
connected in compliance with the
regulations in force, and used only in a
well-ventilated area. Consult the
instructions before installing and using
this appliance.
Since this appliance is not connected to a
combustion products evacuation device,
particular attention should be given to the
relevant requirements regarding
ventilation.
On this subject, combustion can take
place only if oxygen from the air is
present, so this air must be constantly
renewed and the combustion products
must be evacuated (a minimum air input
of 2 m
3
/hour per kW of gas energy is
required).
E.g. : for a 30 cm hob with 2 gas-rings
Total power: 4.6kW
4.6 kW x 2 = 9.2 m3/h
minimum flow-rate.