C
hanging the type of gas
supply (cont'd)
2A
- Changing the injectors of the hob
Installing your cooker : nothing is easier
Each injector is identified by a
number engraved upon it.
Change the injectors using an angled
spanner, proceeding as follows:
➡
Remove the grid cap and head of each
burner
(fig. 1)
.
➡
Unscrew the injectors and remove them
(fig. 2)
.
➡
Replace them with the injectors supplied
by the After sales service, in conformity wi-
th the gas characteristics table supplied on
page 10. To do this:
➡
Screw in the injectors by hand until they
are tight.
➡
Screw the injectors with a tool, on an
angle of 32°.
32° angle
Tool
Angle
spanner
Hearthplate
Injector
fig. 2
fig. 3
fig. 4
Burner cap
Burner head
Injector
Grid
Fig. 1
8
99634212_GB_A.qxd 08/10/04 11:37 Page 8