WHAT SHOULD YOU DO?
POSSIBLE
CAUSES
IF YOU REALIZE
THAT
Your new cooker keeps
tripping out the electric sys-
tem
- Poor connection
- Several electrical appliances are running
at the same time.
➡
Switch off the electricity supply to the other
appliances.
➡
Check the electrical connections.
The flames are too
small on “high flame
position”
- The injector is blocked after cleaning
➡
Clean out the injector using a needle.
The flames are
streaming off the
burners
- The vents on the burner heads are
blocked.
- Poor positioning of the burner cover.
➡
Clean the vents on the burner head.
➡
Check the gas pressure.
➡
Check the position of the burner covers.
➡
➡
Check that you have the right injec-
tors, check the gas used, the gas connec-
tions and the flow adjustment.
The length of the flames
from the lower oven
burner vary during use
- This is due to the regulation of the tem-
perature of the oven thermostat
➡
This is normal
The gas flow reduction
is excessive or the
flames go out
- After a change of gas type
➡
after adjusting the taps, when the tap is
switched to reduced flow the flame should
not go out. If this happens you have to uns-
crew
the brass screw slightly. If it
seems to you that the reduced flow is too large,
you have to srew
the brass screw
slightly and take care
that the flame will never go out.
Minor troubleshooting
You have doubts about whether your cooker is working correctly.
This
does not necessarily mean there is a breakdown.
Nevertheless, check the
following points :
9963-4212 -
10/04
Brandt Appliances
- SAS with 10,000,000 euros of capital, RCS Nanterre under the
number 440 302 347
99634212_GB_A.qxd 08/10/04 11:37 Page 20
