11
U
sing the hob burners
Using your cooker : nothing is easier
●
Ignition with gas safety
Each burner is controlled by a tap with a sa-
fety lock which, in the event of accidental
extinction of the flame (overflows, draughts
etc.) quickly shuts off the arrival of gas and
prevents it from accumulating.
The safety feature for the burners takes the
form of a thermocouple located directly next
to the flame.
■
Knobs with built-in ignition:
➡
Press on the knob and turn it
di-
rection until you reach the
"High Flame" position
➡
Keep the knob pushed in. This will trig-
ger off a series of sparks that will light up
the burner.
In the event of a break in the electricity
supply, it is always possible to light the fla-
me by moving a lighted match near the
burner while at the same time
keeping
the knob for the corresponding tap
opened at maximum flow and pushed
in.
If ever your flame goes out, relight it
as explain above.
Adjustment to a lower flow is carried out by
moving from the "High Flame" symbol and
the "Low flame" symbol. The
●
symbol cor-
responds to the total closure of the tap.
To set on the safety system, keep
the knob pressed firmly for a few
seconds after the flame has lit up.
99634212_GB_A.qxd 08/10/04 11:37 Page 11
