5
Installing your cooker : nothing is easier
S
tatutory installation conditions
■
This cooker must be installed in confor-
mity with the applicable
rules and used only in a well
ventilated area. Consult the
instructions carefully before installing
and using this cooker.
■
Before installation, ensure that the
local gas distribution conditions (type of
gas and pressure) and the adjustment of
the cooker are all compatible.
■
The adjustment conditions of this
cooker are shown on the label glued
inside the housing.
■
The combustion of the gas is made
possible by the oxygen in the air. It is
therefore necessary that the air should be
renewed constantly and that the combustion
products are removed (an air flow of 2m3 per
hour for each kW of power is necessary).
■
This cooker is not connected to an eva-
cuation device for combustion
products. It must be installed and
connected in conformity with the
installation rules applicable and particular
care should be taken with regard to
ventilation.
■
GAS CONNECTIONS :
The gas connection is made at the rear of
the cooker, ensuring that the pipe is
never
in contact with the back of the
cooker
, that it is not located in a spot
where it is likely to become blocked and
that it cannot come into contact with a
moving item.
The walls (rear and adjacent) must be
made from a heat resistant material or
coated with such a material.
Flexible tubes or pipes must be
accessible along their entire length,
replaced before their expiry date
(shown on the pipe), and have a
maximum length of 2 m.
Connection using a flexible pipe attached
to an end piece is
strictly forbidden
if
the gas installation is new or modified
(replacement of the gas supply tap).
99634212_GB_A.qxd 08/10/04 11:37 Page 5
