Brainboxes P.S.I. BOX User Manual Download Page 172

Page: 172 / 187

PSI BOX PLUS+ Reference

Control Functions

UNCONFIGURE.

Prevents Devices Responding To PPoll.

___________

___________________________________________

Purpose.

To prevent all devices responding to the parallel poll

__________

command.

The UNCONFIGURE command is included for

completeness, it performs identically to the PPU command, it
prevents all devices, which have been previously CONFIGUREd,
from responding to parallel polls.

All the devices will need to be reCONFIGUREd if they

are to take part in future parallel polls.

Format.

UNCONFIGURE

_________

Params.

None.

_________

Returns.

None.

__________

Example.

________

BUS UNCONFIGURE

all devices now unable to respond

Bus Activity.

___________

assert ATN if not already so
PPU all devices cannot respond

Page 158

Chapter 8

Summary of Contents for P.S.I. BOX




























































































































































































Search results

Summary of Contents for P.S.I. BOX

Reviews:

Related manuals for P.S.I. BOX

Brands by name

Popular brands

Brainboxes P.S.I. BOX, User Manual

Search results

Summary of Contents for P.S.I. BOX

Reviews:

Related manuals for P.S.I. BOX

Brands by name

Popular brands