PSI BOX Reference
Thank You For Buying The
PSI BOX!
We proudly present the PSI BOX.
The PSI BOX is a very flexible 3 way converter. The PSI
BOX converts signals between IEEE488, RS232C and Centronics
Parallel. The PSI BOX can allow the signals to be passed
between any combination of the different ports. The PSI BOX is
the one stop solution to your interfacing problems.
The PSI BOX PLUS+ allows any computer with a serial
port to become an IEEE bus controller, exercising complete
control over a whole bus full of IEEE instruments. The built in
industry standard IEEE command language gives the user of any
computer, PC, PS/2, micro, mini or mainframe precise control
over the huge range of industry standard IEEE 488 devices.
The PSI BOX PLUS+ includes a disk with two sample
communications programs for use in Mode 7.
Your interface is designed and manufactured in England,
and our policy is one of complete support to our dealers and
direct to our users. The PSI BOX is designed ’in house’ and is
completely understood by our staff. Its great strength is the
support we give it. Our intention is to supply the software and
any technical information you may need to allow you to exercise
complete control over the PSI BOX allowing you to interface
many different types of equipment with each other.
After searching the manuals, do not hesitate to contact us
on our HOTLINE number given on page Intro-2, if you need
help.
We trust that if you adhere to the following instructions
you will enjoy many years of useful service from your interface.
Intro-3
