PCI 1 Port RS422/485
Software Setup
Chapter 3 Page 42
In this window, the COM port assignment may be changed, simply
by selecting a new COM port value from the pull down menu
relevant to the port. However, COM port usage other than those
for the PCI 1 Port Velocity RS422/485 card itself are not checked,
so it is advisable to first check which COM ports are in use - port
availability can be checked by viewing the Device Manager:
All COM ports present will be listed under the entry "Ports
(COM & LPT)." The above screenshots indicates that COM2 - 4
and COM6 and above are not installed, and therefore may be used.
Port Settings In Windows 98/Millenium.
Double clicking on a Velocity RS485 Port entry from the
entry "Ports (Com & LPT)" branch in Device Manager will the
display general properties window for the selected port (in this
case COM5).
•
