PCI 1 Port RS422/485
Software Setup
Chapter 3 Page 52
•
Force CTS True, determines whether the CTS
handshake signal is INPUT from the external serial
device or is permanently forced true on the card.
The serial ports own RTS OUTPUT handshake
signals are always taken out to the serial port
connector.
4. Defaults - When clicked this button resets the
advanced properties to the followed settings:
Use FIFO Buffers:
On (checked)
Transmit Buffers:
1
Receive Buffers:
8
Use Extended FIFO:
Off (Unchecked)
Automatic Hardware
Flow Control:
Off
485 Mode:
Full Duplex
Uninstalling Serial Solutions PCI.
To uninstall Serial Solutions PCI:
•
From Control Panel, open the Add/Remove Programs applet,
then close the Control Panel.
•
Select from the list Serial Solutions PCI.
•
Click the Add/Remove button.
Windows NT will then uninstall the Serial Solutions PCI applet
without the need for restarting.