PCI 1 Port RS422/485
Software Setup
Chapter 3 Page 50
7. Restore Defaults - when clicked, resets the selected
COM port to the following values:
Baud
Rate:
9600
Data
Bits:
8
Parity:
None
Stop
Bits:
1
Flow
Control:
Hardware
Advanced Port Settings.
When the Advanced button of Port Settings is selected the
following dialogue is displayed:
Settings available in this window are:
1. FIFO
settings.
•
Use FIFO Buffers - turns the selected ports FIFO
buffer on or off. It is strongly recommended that the
FIFO for both ports is left enabled.
