PCI 1 Port RS422/485
Software Setup
Chapter 3 Page 26
Note: A port that has been added has the default values of:
Baud Rate:
9600
Data Bits:
8
Parity:
None
top Bits:
1.0
Flow:
None
Change the communications Settings in the COM Ports to
match the baud rate, parity settings etc. of the remote serial device.
Deleting Ports in Windows.
The Delete button can be used to discard the entries of
ports that have been removed from the system.
Note. Never try to leave out a serial port number when
using the delete button, because Windows may automatically shift
serial port numbers which results in a mis-match of settings in the
Serial Ports Applet (COM1-COM4 only).
Restarting Windows.
Whenever certain values have been entered or changed in
the hardware settings window, a message prompting to restart
Windows will appear. Only after having made ALL the necessary
changes restart Windows so that the new settings come into effect.
