Brady POWERMark, User Manual

Page: 95 / 201

Printing
¡ 4-5
Selecting ribbon type
When you create a label, the system uses color information from the installed ribbon. As
noted in the previous section, when you turn on the system, the system checks which type
of ribbon is installed. If no ribbon is installed, the “Unknown supply type” message
displays, and you’re prompted to install the ribbon. If you press a key to continue without
installing a ribbon cartridge, the Ribbon window displays as shown below (see
Operating
the system without supplies installed
on page 4-7 for details). This window allows you to
choose the type of ribbon you want to use for the label without installing the ribbon.
Press the
←
or
→
key to display either Paneled or Monochrome, then press Enter.
• Paneled—If you choose Paneled, the Paneled Ribbon window displays. You can select ribbon
colors and panel length. When you create labels, you can choose from these colors. (You can
also print more colors by swapping ribbons. See
Supply ribbon
on page 4-3 for details.) When
you print the labels, you need to install the paneled ribbon you selected here.
• Press the
↑
or
↓
key to highlight the option you want to set, then press the
←
or
→
key to display
the setting you want to use. When you’re done, press Enter.
• Monochrome—If you choose Monochrome, no further settings are required.
Note: The settings you choose in this window are in effect until you
print or turn the system off.
Ribbon type: Paneled
Ribbon
Press
←→
, ENTER or ESC
Colors: 00. Black/Red
Panel length: 8"
Paneled Ribbon
Press
↑↓←→
, ENTER or ESC