BP-PR PLUS series
Memory cards
Edition 3/07
Configuration Instructions
57
8.2
Formatting
If the memory card has not been preformatted in a suitable way, you must format it in the following man-
ner:
•
Formatting in the printer via the
Format card
(see "8.4.4" on Page 60) menu item.
•
Formatting in the printer via the interface with the Mf;name CR command. See
“Programming
Instructions“
.
•
Formatting in an appropriate drive of a PC. See documentation of the drive used.
8.3
Writing
The memory card can be written to in several ways. The most functionally secure way is writing to the
card in the printer via a data interface.
Example:
With direct programming, the command sequence for saving a label (file
ABC
) has the following form:
•
After transfer of the command sequence, the file ABC is saved on the memory card with the com-
mands from J to A.
•
Only one label is printed each time the file ABC is called up.
•
The [NOPRINT] parameter in command A suppresses the printing of a label when the file is saved.
•
If you would like to print the label a variable number of times, you must put command A after the
ending Ms command.
The card in the primary card slot is written to by default. You can write to a card in another slot if you
specify the path name of the slot in the file name (see
“Programming Instructions“
).
Ms LBL; ABC
Command for saving the file
ABC
J
|
H 100,0,T
|
S |1;0,0,68,71,104
| Contents of the file
ABC
T 10,10,0,3,pt15;memory card
|
A 1[NOPRINT]
|
Ms LBL
End of save command
