22
Configuration Instructions
Edition 3/07
Configuration
BP-PR PLUS series
4.1.2
Device settings
1. Press the
menu
button.
2. Select
Setup
>
Machine param.
.
Tab. 9:
Parameters of the menu
Setup
>
Machine param.
Parameter
Meaning
Default
Printhead pos. X
Shifting of the entire print image perpendicular to the direction of paper flow.
The absolute shifting of the print image perpendicular to the direction of
paper flow is limited to the difference between the label width and the print-
head width set in the software.
You can also set the
Printhead pos. X
via software. The offset values
from the
Machine param.
menu and the software are added together.
0.0 mm
Printhead pos. Y
Shifting of the entire print image in the direction of paper flow. With positive
values, printing begins later in the direction of paper flow.
Shifting of the print image in the direction of paper flow also influences the
peel and cutting positions.
⇒
Correct the
Peel position
and
Cut position
parameters by the
same value in the opposite direction.
You can also set the
Printhead pos. Y
via software. The offset values
from the
Machine param.
menu and the software are added together.
0.0 mm
Tear-off pos.
Shifting of the tear-off position in the direction of paper flow. With positive
values, the label strip is transported farther out of the printer.
0.0 mm
Demand sensor
Configuration of the optional peel-off module. See documentation of the peel-off module.
If peel-off module is not connected, access only granted with service key inserted!
Cutter
Configuration of the optional cutter. See documentation of the cutter.
If cutter is not connected, access only granted with service key inserted!
Applicator
Configuration of the optional applicator. See documentation of the applicator.
If applicator is not connected, access only granted with service key inserted!
Brightn. LCD
Brightness of the LCD display from 1 to 10
10
Contrast LCD
Contrast of the LCD display from 4 to 8.
6
Time Powersave
.
Time between the last operation and the activation of Powersave mode.
5 min.
Debug mode
Operating mode which supports the firmware programmer when localizing
errors.
Off
