32
Configuration Instructions
Edition 3/07
Configuration
BP-PR PLUS series
The following parameters for the Ethernet interface can only be accessed via the printer website:
Tab. 14:
Additional parameters for Ethernet interface
Parameter
Meaning
Default
SMTP server
E-mails can be sent to selected addresses when certain status and error
messages are generated. To activate:
⇒
Set parameter to "On".
⇒
Enter IP address of the SMTP server.
⇒
Enter a valid e-mail address for the printer in the "From address"
field.
More detailed information on sending e-mails is found in “System mes-
sages tab" on Page 33.
Off
Raw-IP port
Service for printing on the network (see "2.2.1" on Page 16).
⇒
Select a predefined port address.
9100
LPD
Activation of the network printing service LPD (see "2.2.1" on Page 16):
⇒
Set parameter to "On".
⇒
Enter "lp" as the queue name.
Off
SNMP
Data exchange between printer and management station via SNMP
(Simple Network Management Protocol). To activate:
⇒
Set parameter to "On".
⇒
Enter IP address of the management station(s) (receiver 1 or
receiver 2).
⇒
Assign the "Community" parameter the value "public".
Off
Time server
Synchronization of the date and time of the printer. To activate:
⇒
Set parameter to "On".
⇒
Enter IP address of the time server.
Synchronization occurs hourly. The accepted time is not automatically
saved in the printer, however. To save the accepted time:
⇒
Call up the parameter time and save the displayed setting with OK.
Off
