44
Configuration Instructions
Edition 3/07
Test functions
BP-PR PLUS series
Example:
In the following two figures, the printout in Monitor mode is contrasted with the "normal" printout of a
label.
Fig. 17:
Example label
Fig. 18:
Printout of the example label in
ASCII Dump Mode
5.7
Test grid
The
Test grid
function prints out the geometric pattern on a background grid. This allows you to
assess the evenness of the print quality.
The printout occurs using the heat level and print speed specified in the
Setup
>
Print param.
menu.
1. Insert printable medium (labels, endless paper) which extends across the entire printing width.
2. If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum
width.
3. Press the
menu
button.
4. Select
Test
>
Test grid
menu.
5. Start printout with the
↵
button.
The geometric pattern is printed every 5 seconds once the
Test grid
function is started. You can
adjust the printer during the pauses between the printouts.
You can end the printout of the test grid with the
cancel
button.
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
