BP-PR PLUS series
Test functions
Edition 3/07
Configuration Instructions
47
5.9
Event log
The printer saves the following events in the
Event log
:
•
Hardware fault
•
Printhead replacement with a change in resolution
•
Adjustment of the label sensor
•
Firmware updates
•
Resetting of the service counters
The printout of the
Event log
occurs using the heat level and print speed specified in the menu
Setup
>
Print param.
1. Insert service key into a USB master interface.
2. Insert printable medium (labels, endless paper) which extends across the entire printing width.
3. If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum
width.
4. Press the
menu
button.
5. Select
Test
>
Event log
menu.
6. Start printout with the
↵
button.
Fig. 21:
Event log
The
Event log
contains the following information:
Tab. 20:
Information in the
Event log
Access only when service key is inserted!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
Location
Description
First line
Version number and creation date of the firmware
Second line
Version number and creation date of the bootloader
Left column
Date and time the event occurred
Right column
Brief description of the event
