31
16. Install the two tie plates between the two end brackets,
using the dowels in the end brackets to align and posi-
tion them. Install all 24 capscrews and lockwashers
(Items 15 and 16) securing the tie plates to the end
brackets.
17. Install a new O-ring (Item 26) onto the motor adapter.
Install the motor adapter into the winch drive using four
capscrews and lockwashers (Items 33 and 4).
18. Install the motor coupling into the inner race of the
sprag clutch.
19. Install a new O-ring (Item 121) onto the pilot of the hy-
draulic motor. Install the hydraulic motor into the mo-
tor adapter, engaging the motor splines with the motor
coupling. Install the four capscrews and lockwashers
(Items 122 and 123), securing the motor to the motor
adapter. Connect the brake release hose to the brake
release port on the winch drive.
Summary of Contents for CH330
Page 2: ...2...