Operator’
s Manual
SMASH 24GT
1
0
Safety
1.0 Safety
The safety precautions must be completely understood
A
and observed by every operator.
THE OPERATOR MUST STAY NEAR 'THE MACHINE,
IN GOOD POSITION OF WORK, AT THE COMMAND
UNIT SIDE (A).
ONLY THE OPERATOR MAY ACCESS THE WORK
AREA.
THE USE OF THIS DEVICE IS ALLOWED ONLY TO
PERSONNEL DULY TRAINED BY AN AUTHORIZED
DEALER.
ANY TAMPERING WITH OR MODIFICATION OF THIS
DEVICE OR ITS PARTS OR COMPONENTS NOT
PREVIOUSLYAUTHORIZED BY THE MANUFACTURER
WAIVE THE MANUFACTURER FROM ANY DAMAGE
RESULTING FROM OR RELATED TO THE ABOVE-
MENTIONED TAMPERINGS.
REMOVING OR BYPASSING SAFETY DEVICES OR
WARNING L ABELS OF THE M ACHINE IS A
VIOLATION OF THE SAFETY REGULATIONS.
THE USE OF THIS DEVICE IS ALLOWED ONLY IN
LOCATIONS WITH NO EXPLOSION OR FIRE
HAZARD.
THE INSTALLATION SHALL BE CARRIED OUT
ONLY BY QUALIFIED PERSONNEL AND WITHIN
THE SCOPE OF THE INSTRUCTIONS PROVIDED
IN THIS MANUAL.
THIS DEVICE IS DESIGNED TO ACCEPT ORIGINAL
SPARE PARTS AND ACCESSORIES ONLY.
CHECK FOR POSSIBLE DANGEROUS CONDITIONS
DURING THE OPERATION OF THE MACHINE. IN
SUCH A CASE STOP THE MACHINE IMMEDIATELY.
IN CASE OF DEFECTIVE FUNCTIONING, STOP THE
M ACHINE AND C AL L THE AUTHORIZED
DISTRIBUTOR FOR ASSISTANCE.
DURING USE AND MAINTENANCE OF THE MACHINE
IT IS MANDATORY TO COMPLY WITH ALL LAWS
AND REGULATIONS FOR ACCIDENT PREVENTION.
THE ELECTRICAL SYSTEM MUST HAVE AN EARTH
CABLE AMD THE M ACHINE EARTH CABLE
(YELLOW/GREEN) MUST BE CONNECTED TO THE
EARTH CABLE OF THE MAINS SUPPLY
BEFORE PERFORMING ANY MAINTENANCE OR
REPAIRS THE MACHINE MUST BE DISCONNECTED
FROM THE AIR AND ELECTRICAL SUPPLY.
http://www.atlas-tools.ru
АТЛАС
-
ОБОРУДОВАНИЕ
для
АВТОСЕРВИСА
+7 (863) 226-92-88