Boston Scientific LATITUDE Patient Manual Download Page 57

Page: 57 / 84

LATITUDE

Communicator Patient Manual

English

Care and Maintenance

Your Communicator does not require any regular
service or maintenance.

Your Communicator does not require electrical safety
testing after installation or during periodic maintenance.

To ensure optimum performance of your Communicator
and accessories and protect them from damage, follow
these directions:

CAUTIONS:

• Do not drop or mishandle the Communicator or

its accessories in a manner that would cause
damage.

• Avoid getting liquid on the unit other than cleaning

it as recommended. Do not use abrasive cloth or
solvents to clean the unit.

• Do not submerge the Communicator or its

accessories in liquid.

• Do not attempt to open the Communicator or any

of its accessories.

• Use this unit as described in this instruction

manual. Use only authorized parts and
accessories. Do not attempt to modify or alter this
unit or accessories.

If your Communicator or accessories become damaged
or malfunction, contact your health care provider.

Summary of Contents for LATITUDE





















































































Search results

Summary of Contents for LATITUDE

Reviews:

Related manuals for LATITUDE

Brands by name

Popular brands

Boston Scientific LATITUDE, Patient Manual

Search results

Summary of Contents for LATITUDE

Reviews:

Related manuals for LATITUDE

Brands by name

Popular brands