Boston Scientific LATITUDE Patient Manual Download Page 20

Page: 20 / 84

LATITUDE

Communicator Patient Manual

English

4. Insert the AC adapter (included) into the jack

labeled

5. Plug the AC adapter into an electrical outlet that is

easily accessible.

6. When electrical power is supplied, the

Communicator begins a startup process. The
LATITUDE indicator

ashes for up to one

minute while the Communicator starts up. The
Communicator then lights all the indicators for
approximately one second to indicate all indicators
are working.
If the LATITUDE indicator is not lit, check that both
ends of the AC adapter are plugged in

rmly. Check

if the light on the AC adapter is on.

Important

: Your Communicator should remain

connected to the electrical outlet and telephone wall
jack.

7. When installing the Communicator for the

rst

time, wait for the Heart button to

ash with a white

light. Press the

ashing Heart button to check if

the Communicator can interrogate your implanted
device and send your data to the LATITUDE
system.

Continue with step 8 unless installation takes longer
than 5 minutes or the Heart button

ashes again. In

that case, continue with “Software Download and
Installation” on page 10.

8. Determine whether the installation succeeded

( all indicators are lit a steady color) or failed by
referring to “Indicator Sequence When Using the
Heart Button” on page 17.

Summary of Contents for LATITUDE





















































































Search results

Summary of Contents for LATITUDE

Reviews:

Related manuals for LATITUDE

Brands by name

Popular brands

Boston Scientific LATITUDE, Patient Manual

Search results

Summary of Contents for LATITUDE

Reviews:

Related manuals for LATITUDE

Brands by name

Popular brands