Boston Scientific LATITUDE Patient Manual Download Page 42

Page: 42 / 84

LATITUDE

Communicator Patient Manual

English

Three Yellow Collecting Waves

Description:

Any of the following reasons could cause
this error:
• You may have exceeded your weekly

interrogation limit, or you may not be

allowed to use the Heart button.

• The Communicator was unable to

establish wireless communication

with your implanted device due to

interference from another person’s

implanted device.

Action:

• If you are planning to interrogate

your device, wait 10 minutes. Then

try pressing the Heart button again to

initiate the interrogation.

• Do not press the Heart button while the

interrogation is in progress unless you

intend to stop the interrogation.

• If you see three yellow waves after

pressing the Heart button, contact your

health care provider.

Summary of Contents for LATITUDE





















































































Search results

Summary of Contents for LATITUDE

Reviews:

Related manuals for LATITUDE

Brands by name

Popular brands

Boston Scientific LATITUDE, Patient Manual

Search results

Summary of Contents for LATITUDE

Reviews:

Related manuals for LATITUDE

Brands by name

Popular brands