Boston Scientific LATITUDE Patient Manual Download Page 51 | Manualshive

Page: 51 / 84

background image

43

LATITUDE

®

Communicator Patient Manual

English

Interrogating Your Implanted Device

The Communicator automatically interrogates your
implanted device on a regular schedule set by your
health care provider. This may happen without your
awareness and should not require any action on
your part. Daily device checks are also performed
automatically. None of the Communicator indicators will
light during a scheduled interrogation or daily device
check.

A scheduled interrogation will not be completed if you
are out of range (10 ft/3 m) from the Communicator
when it attempts to communicate with your implanted
device. If the Communicator is unable to automatically
interrogate your device after repeated attempts, the
Heart button will

fl

ash to allow you to complete the

interrogation manually. The Heart button also

fl

ashes

the

fi

rst time you use the Communicator.

The Heart button is designed to enable you to
manually interrogate your implanted device. Manual
interrogation is a feature that must be enabled by
your health care provider. When you press the Heart
button, the Communicator checks to make sure that
the interrogation is permitted. You should only use the
Heart button if it is

fl

ashing or when instructed to do so

by your health care provider.

If you press the Heart button by mistake (not intending
to perform an interrogation), press and hold the Heart
button again for at least 5 seconds to cancel the
interrogation. The Collecting Waves may light yellow
and show progress while the interrogation is being
cancelled.

«
...
49
50
51
52
53
...
»

Summary of Contents for LATITUDE





















































































Reviews:

No comments

Related manuals for LATITUDE

Scopia XT5000 Series

Brand: RADVision Pages: 184

Brand: Sony Ericsson Pages: 8

Brand: i-mobile Pages: 35

Brand: Pantech Pages: 61

Brand: Avaya Pages: 4

Brand: Alcatel Pages: 2

Brand: Proolin VoIP Tech Pages: 25

Brand: iData Pages: 38

Brand: Mircom Pages: 40

Brand: E-MetroTel Pages: 8

Brand: Verykool Pages: 33

Brand: Gigaset Pages: 2

Brand: Archos Pages: 180

Brand: SENDO Pages: 54

Brand: Avaya Pages: 3

Brand: Pantech Pages: 76

Brand: Olens Technology Pages: 24

Brand: Commander Pages: 120

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands