Boston Scientific LATITUDE Patient Manual Download Page 58

Page: 58 / 84

LATITUDE

Communicator Patient Manual

English

Cleaning the Communicator and Accessories

When necessary, clean the Communicator and its
accessories with a soft, clean, lint-free cloth moistened
in water or mild detergent. Note that the

nish on

some types of furniture could be affected as a result
of continuous contact with rubber material such as the
type used on the base of the Communicator.

CAUTIONS

• Do not use other cleaning

uids. They may

damage the front lens of the Communicator.
Never spray any cleaning

uid directly on the

Communicator front lens. Do not allow moisture
to accumulate on or around the lens or Heart
button.

• Avoid using any cleaning

uid near the electrical

plugs on the back of the Communicator.

Summary of Contents for LATITUDE





















































































Search results

Summary of Contents for LATITUDE

Reviews:

Related manuals for LATITUDE

Brands by name

Popular brands

Boston Scientific LATITUDE, Patient Manual

Search results

Summary of Contents for LATITUDE

Reviews:

Related manuals for LATITUDE

Brands by name

Popular brands