Boss GT-001, Parameter Manual

Page: 26 / 48

MENU
26
Knob Parameter Value Explanation
[2] MIN
OFF, ON
(or STOP, START,
PLAY)
This sets the value for times when the
switch is Off.
[3] MAX
OFF, ON
(or STOP, START,
PLAY)
This sets the value for times when the
switch is On.
[4]
MODE
(SOURCE
MODE)
This sets the behavior of the value each time the switch is
operation.
MOMENT
The normal state is Off (minimum value),
with the switch On (maximum value)
only while the footswitch is depressed.
TOGGLE
The setting is toggled On (maximum
value) or Off (minimum value) with each
press of the footswitch.
EXP
Here’s how to assign the parameters that will be controlled by an
expression pedal (such as the separately available EV-5) connected
to the CTL/EXP jack.
Knob Parameter Value Explanation
[1] FUNC
OFF No assignment.
FV
(FOOT VOLUME)
Foot volume will be assigned.
PB
(PEDAL BEND)
Pedal bend will be assigned.
WAH Wah will be assigned.
PB/FV
Pedal bend and foot volume
will be assigned.
WAH/FV
Wah and foot volume will be
assigned.
PAT LV
(PATCH LEVEL) *1
Patch level will be assigned.
[3]
MIN
(PATCH LEVEL
MIN) *2
0–200 Specifies the minimum value.
[4]
MAX
(PATCH LEVEL
MAX) *2
0–200 Specifies the maximum value.
This is shown only if PERFORMANCE (p. 35) is set to SYSTEM.
*2 Shown only if PATCH LEVEL is selected in FUNC.
Specifying the External Pedal Function
for Each Patch (Assign)
Here’s how the function of an external pedal (footswitch, expression
pedal) connected to the CTL/EXP jack can be specified for each
patch. For each patch, you can make eight different assignments
(assign number 1–8) that specify which pedal controls which
parameter.
* Select each individual parameter to specify which pedal will
control each parameter.
1.
Choose [MENU]
"
”CTL/EXP”
"
”ASSIGN C (COMMON)” or
”ASSIGN 1–8 .”
2.
Set the parameter values with knobs [1]–[4] .
ASSIGN COMMON
Knob Parameter Value Explanation
[1]
SENS
(INPUT SENS)
0–100
This adjusts the input sensitivity when INPUT
LEVEL is selected for SOURCE.
ASSIGN 1–8
Knob Parameter Value Explanation
[1] ASSIGN OFF, ON Turns the ASSIGN 1–8 on/off.
[2] SOURCE
EXP PDL
(EXP PEDAL)
Assigns the external footswitch
(FS-5U, FS-6; available separately)
connected to the CTL/EXP jack.
CTL1 PDL
(CTL1 PEDAL)
Assigns the external footswitch
(FS-5U, FS-6; available separately)
connected to the CTL/EXP jack.
CTL2 PDL
(CTL2 PEDAL)
Assigns the external footswitch
(FS-5U, FS-6; available separately)
connected to the CTL/EXP jack.
INT PDL
(INTERNAL
PEDAL)
Refer to “Virtual expression pedal
system (Internal Pedal / Wave
Pedal)” (p. 31)
WAV PDL
(WAVE PEDAL)
Refer to “Virtual expression pedal
system (Internal Pedal / Wave
Pedal)” (p. 31)
INPUT
(INPUT LEVEL)
The assigned target parameter
will change according to the input
level.
CC#1–#31
Control Change messages from an
external MIDI device.
CC#64–#95
Control Change messages from an
external MIDI device.
[3]
MODE
(SOURCE MODE)
MOMENT
The normal state is Off (minimum
value), with the switch On
(maximum value) only while the
footswitch is depressed.
TOGGLE
The setting is toggled On
(maximum value) or Off
(minimum value) with each press
of the footswitch.
Page 2
[1]
CATEGORY
(TARGET
CATEGORY)
This selects the parameter to be changed.
Refer to TARGET list
[2] TARGET
[3]
MIN
(TARGET MIN)
This sets the minimum value for the range in which
the parameter can change. The value differs depend-
ing on the parameter assigned for TARGET parameter.
[4]
MAX
(TARGET MAX)
This sets the maximum value for the range in
which the parameter can change. The value differs
depending on the parameter assigned for TARGET
parameter.