Boss GT-001 Parameter Manual Download Page 16

Page: 16 / 48

EFFECT

SLICER

This consecutively interrupts the sound to create the impression

that a rhythm backing phrase is being played.

Knob

Parameter

Value

Explanation

Page 1

[1]

PATTERN

P1–P20

Select the slice pattern that will be

used to cut the sound.

[2]

RATE

0–100,
BPM –

Adjust the rate at which the sound

will be cut.

* When set to BPM, the value of each

parameter will be set according

to the value of the “MASTER BPM”

specified for each patch. This

makes it easier to achieve effect

sound settings that match the

tempo of the song.

* If, due to the tempo, the time is

longer than the range of allowable

settings, it is then synchronized to

a period either 1/2 or 1/4 of that

time.

[3]

SENS
(TRIGGER SENS)

0–100

Adjust the sensitivity of triggering.
With low settings of this parameter,

softly picked notes will not retrigger

the phrase (i.e., the phrase will

continue playing), but strongly

picked notes will retrigger the

phrase so that it will playback from

the beginning. With high settings

of this parameter, the phrase will be

retriggered even by softly picked

notes.

[4]

E .LEVEL
(EFFECT LEVEL)

0–100

Adjusts the volume of the effect

sound.

Page 2

[1]

DIR .MIX
(DIRECT MIX)

0–100

Adjusts the volume of the direct

sound.

VIBRATO

This effect creates vibrato by slightly modulating the pitch.

Knob

Parameter

Value

Explanation

Page 1

[1]

RATE

0–100,
BPM –

Adjusts the rate of the vibrato.

* When set to BPM, the value of each

parameter will be set according to the

value of the “MASTER BPM” specified

for each patch. This makes it easier

to achieve effect sound settings that

match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it is

then synchronized to a period either 1/2

or 1/4 of that time.

[2]

DEPTH

0–100

Adjusts the depth of the vibrato.

[3]

TRIGGER

OFF, ON

This selects on/off of the vibrato.

* It is assumed that this parameter will be

assigned to the footswitch.

[4]

RISE .TM
(RISE TIME)

0–100

This sets the time passing from the

moment the Trigger is turned on until the

set vibrato is obtained.

* When a patch with TRIGGER set to ON is

called up, the effect obtained is identical

to what happens when TRIGGER is

switched from Off to On. If you want

the vibrato effect to be produced

immediately after the patches are

switched, set RISE TIME to 0.

Page 2
[1]

LEVEL

0–100

Adjusts the volume.

RING MOD

The sound can be unmusical and lack distinctive pitches.

Knob

Parameter

Value

Explanation

[1]

MODE

This selects the mode for the ring modulator.
NORMAL

This is a normal ring modulator.

INTELLI

(INTELLIGENT)

By ring-modulating the

input signal, a bell like sound

is created. The intelligent

ring modulator changes the

oscillation frequency according

to the pitch of the input sound

and therefore produces a sound

with the sense of pitch, which

is quite different from NORMAL.

This effect does not give a

satisfactory result if the pitch of

the guitar sound is not correctly

detected. So, you must use

single notes, not chords.

[2]

FREQ

(FREQUENCY)

0–100

Adjusts the frequency of the

internal oscillator.

[3]

E .LEVEL

(EFFECT LEVEL)

0–100

Adjusts the volume of the effect

sound.

[4]

DIR .MIX

(DIRECT MIX)

0–100

Adjusts the volume of the direct

sound.

HUMANIZER

This can create human vowel-like sounds.

Knob

Parameter

Value

Explanation

Page 1

[1]

MODE

This sets the mode that switches the vowels.

PICKING

It changes from VOWEL 1 to VOWEL 2

along with the picking. The time spent

for the change is adjusted with the rate.

AUTO

By adjusting the rate and depth, two

vowels (VOWEL 1 and VOWEL 2) can be

switched automatically.

[2]

VOWEL 1

a, e, i, o, u

Selects the first vowel.

[3]

VOWEL 2

a, e, i, o, u

Selects the second vowel.

[4]

SENS *1

0–100

Adjusts the sensitivity of the

humanizer.

When it is set to a lower value, no

effect of the humanizer is obtained

with weaker picking, while stronger

picking produces the effect. When it is

set to a higher value, the effect of the

humanizer can be obtained whether

the picking is weak or strong.

Page 2

[1]

RATE

0–100,
BPM –

Adjusts the cycle for changing the two

vowels.
* When set to BPM, the value of each

parameter will be set according

to the value of the “MASTER BPM”

specified for each patch. This makes

it easier to achieve effect sound

settings that match the tempo of

the song.

* If, due to the tempo, the time is

longer than the range of allowable

settings, it is then synchronized to

a period either 1/2 or 1/4 of that time.

[2]

DEPTH

0–100

Adjusts the depth of the effect.

[3]

MANUAL *2

0–100

Adjusts the cycle for changing the two

vowels. When it is set to lower than 50,

the time for VOWEL 1 is shorter. When

it is set to higher than 50, the time for

VOWEL 1 is longer.

[4]

LEVEL

0–100

Adjusts the volume.

*1 Setting available when MODE is set to PICKING.
*2 Setting available when MODE is set to AUTO.

Summary of Contents for GT-001

















































Search results

Summary of Contents for GT-001

Reviews:

Related manuals for GT-001

Brands by name

Popular brands

Boss GT-001, Parameter Manual

Search results

Summary of Contents for GT-001

Reviews:

Related manuals for GT-001

Brands by name

Popular brands