MENU
34
USB
Here you can make USB-related settings for when the GT-001 is
connected to a computer via USB.
USB audio flow
GT-001 provides two USB audio outputs: “PRIMARY” and
“SECONDARY.”
PRIMARY outputs the effect sound, and the return from the
computer is mixed with your guitar performance at the final
stage.
Regardless of the settings of the GT-001 itself, SECONDARY
always outputs the dry sound, and the return from the
computer is always returned to the beginning of the effect
chain.
With GT-001, both PRIMARY and SECONDARY are being
output to the computer; this means that by using two guitar
tracks on your computer, you can record the dry sound and
effect sound simultaneously.
If you’re not happy with the effect sound from PRIMARY, you
can play back the simultaneously-recorded dry sound from
SECONDARY, and send it through the effect chain of GT-001
to modify the sound to your liking.
USB SECONDARY
TO
EFX
DRY OUT
Effect Chain
GT-001
USB IN
USB OUT
INPUT
OUTPUT
USB PRIMARY
MIX
LVL
OUTPUT
Level
GT-001
USB IN
INPUT
Effect Chain
USB OUT
OUTPUT
USB PRIMARY
Knob
Parameter
Value
Explanation
Page 1
[1]
MIX .LVL
(MIX LEVEL)
0–200%
Adjusts the level of the audio input from the
computer. At this time, the audio input from
the computer is mixed at the final stage of
the GT-001.
[2]
EFX .OUT
(EFFECT
OUTPUT
LEVEL)
0–200%
Adjusts the level of the output to the
computer.
[3]
LOOP
(LOOP BACK)
OFF, ON
If this is ON, the sound from the computer is
mixed with the effect sound of the GT-001
and sent to the computer.
[4]
DIR . MONITOR
Switches the output of the GT-001 sound to the OUTPUT
and PHONES jacks.
* This setting cannot be saved. It is set to ON when the
power is turned on.
OFF
Set this to Off if transmitting audio data
internally through a computer (Thru).
No sound is heard at this time unless the
setting for the computer is Thru.
ON
The GT-001 sound is output. Set this to ON
when using the GT-001 as a standalone
device, without connecting to a computer
(only USB input sound will be output if this
is set to Off).
USB SECONDARY
Knob
Parameter
Value
Explanation
Page 2
[1]
TO .EFX
(TO EFFECT LEVEL)
-20–+20 dB Adjusts the input level from the
computer to the GT-001’s effects.
[3]
DRY .OUT
(DRY GUITAR
OUTPUT LEVEL)
0–200%
Outputs the unmodified sound (dry
sound) of the guitar that is being input
to the GT-001.
GLOBAL EQ
This adjusts the tone of the OUTPUT regardless of the equalizer on/
off settings of individual patches.
Knob
Parameter
Value
Explanation
Page 1
[1]
LOW
(LOW GAIN)
-20–+20 dB
Adjusts the low frequency
range tone.
[2]
MID
(MID GAIN)
-20–+20 dB
Adjusts the middle frequency
range tone.
[3]
MID .FREQ
(MID FREQUENCY)
20.0 Hz–10.0
kHz
Specifies the center of the
frequency range that will be
adjusted by the MID GAIN.
[4]
MID .Q
0.5–16
Adjusts the width of the area
affected by the EQ centered at
the MID FREQ. Higher values
will narrow the area.
Page 2
[1]
HIGH (HIGH GAIN)
-20–+20 dB
Adjusts the high frequency
range tone.
