Bosch VIP-X1XF Installation And Operating Manual Download Page 29

Page: 29 / 132

VIP X1 XF

Configuration using a Web browser | en

Bosch Sicherheitssysteme GmbH

Installation and Operating Manual

DOC | V4.54 | 2011.09

5.5

Basic Mode: Network

The settings on this page are used to integrate the VIP X1 XF into an existing network.

Some changes only take effect after the unit is rebooted. In this case, the

Set

button changes

Set and Reboot

Make the desired changes.

Click the

Set and Reboot

button. The VIP X1 XF is rebooted and the changed settings are

activated.

DHCP

If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you

can activate acceptance of IP addresses automatically assigned to the VIP X1 XF.

Certain applications (Bosch Video Client, Bosch Video Management System) use the IP

address for the unique assignment of the unit. If you use these applications, the DHCP server

must support the fixed assignment between IP address and MAC address, and must be

appropriately set up so that, once an IP address is assigned, it is retained each time the

system is rebooted.

IP address

Enter the desired IP address for the VIP X1 XF in this field. The IP address must be valid for

the network.

Subnet mask

Enter the appropriate subnet mask for the selected IP address here.

Gateway address

If you want the unit to establish a connection to a remote location in a different subnet, enter

the IP address of the gateway here. Otherwise leave the box blank (

0.0.0.0

CAUTION!

If you change the IP address, subnet mask or gateway address, the VIP X1 XF is only available

under the new addresses after the reboot.

Summary of Contents for VIP-X1XF





































































































































Search results

Summary of Contents for VIP-X1XF

Reviews:

Related manuals for VIP-X1XF

Brands by name

Popular brands

Bosch VIP-X1XF, Installation And Operating Manual

Search results

Summary of Contents for VIP-X1XF

Reviews:

Related manuals for VIP-X1XF

Brands by name

Popular brands