Bosch VIP-X1XF Installation And Operating Manual Download Page 57

Page: 57 / 132

VIP X1 XF

Configuration using a Web browser | en

Bosch Sicherheitssysteme GmbH

Installation and Operating Manual

DOC | V4.54 | 2011.09

Stream

Here you can select the data stream that is to be used for standard recordings. You can select

the data stream for alarm recordings separately and independently of this (see

Section Alarm

stream, page 57

Pre-alarm time

You can select the required pre-alarm time from the list field. This parameter is only

accessible if you have selected the

Pre-alarm

option under

Standard recording

Post-alarm time

You can select the required post-alarm time from the list field.

Alarm stream

Here you can select the data stream that is to be used for alarm recordings. You can select the

data stream for standard recordings separately and independently of this (see

Section Stream, page 57

with encoding interval from profile:

You can select an alternative encoding interval for the data stream for alarm recordings.

Otherwise the encoding interval of the selected encoder profile is used (see

Section 5.19 Advanced Mode: Encoder Profile, page 47

Export to FTP

Select this parameter if you want all alarm recordings to be exported to an FTP server

automatically. Make sure to have inserted all relevant data for FTP posting (see

Section 5.41 Advanced Mode: FTP Posting, page 89

Alarm input / Motion/Audio alarm / Video loss alarm

Here you can select the alarm sensor that is to trigger a recording.

Virtual alarm

Here you can select the virtual alarm sensors that are to trigger a recording, via RCP+

commands or alarm scripts, for example.

NOTICE!

The alarm inputs are configured and activated on the

Alarm Inputs

page (see

Section 5.35 Advanced Mode: Alarm Inputs, page 78

The numbering of the checkboxes for the alarm inputs corresponds to the labeling of the

alarm inputs on the VIP X1 XF.

The motion alarm is configured and activated on the

VCA

page (see

Section 5.28 Advanced

Mode: VCA, page 64

onwards).

The audio alarm is configured and activated on the

Audio Alarm

page (see

Section 5.32 Advanced Mode: Audio Alarm, page 73

NOTICE!

For more information, please see the

Alarm Task Script Language

document and the RCP+

documentation. These documents can be found on the product CD supplied.

Summary of Contents for VIP-X1XF





































































































































Search results

Summary of Contents for VIP-X1XF

Reviews:

Related manuals for VIP-X1XF

Brands by name

Popular brands

Bosch VIP-X1XF, Installation And Operating Manual

Search results

Summary of Contents for VIP-X1XF

Reviews:

Related manuals for VIP-X1XF

Brands by name

Popular brands