Bosch VIP-X1XF, Installation And Operating Manual

Page: 122 / 132

122 en | Specifications VIP X1 XF
DOC | V4.54 | 2011.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH
9.2 Eco-version
Unit
Image refresh rate 25/30 ips max.
Network protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP,
IGMP V2, IGMP V3, ICMP, ARP, SMTP, SNTP, SNMP, RTSP,
802.1x, iSCSI, DynDNS, UPnP
Audio coding protocol G.711, 300 Hz to 3.4 kHz
L16, 300 Hz to 6.4 kHz
Audio sampling rate G.711: 8 kHz
L16: 16 kHz
Audio data rate G.711: 80 kbps
L16: 640 kbps
Signal-to-noise ratio > 50 dB
Operating voltage 12 V DC,
power supply via external unit
polarity: ; jack must fit a pin of 2 mm (0.079 in) in
diameter
Power consumption Approx. 3.6 VA
LAN interfaces 1 × Ethernet 10/100 Base-T, automatic adjustment,
half/full duplex, RJ45
Data interfaces 1 × RS-232/RS-422/RS-485, bidirectional, push-in terminal
SD Slot 1 × SD CARD, for standard SD cards or SDHC up to 32 GB
Alarm input 1 × push-in terminal (non-isolated closing contact),
maximum activation resistance 10 Ohm
Relay output 1 × push-in terminal, 30 V
p-p
(SELV), 200 mA, 2 contacts
Video Input 1 × BNC socket
0.7 to 1.2 V
p-p
, 75 Ohm, PAL/NTSC
Audio input (LINE IN) 1 × 3.5 mm stereo socket
5.5 V
p-p
max., impedance 9 kOhm typ.
Audio output (LINE OUT) 1 × 3.5 mm stereo socket
3.0 V
p-p
, impedance 10 kOhm typ.
2.3 V
p-p
, impedance 32 Ohm typ.
1.7 V
p-p
, impedance 16 Ohm typ.
Displays 1 × LED (operation) on the front panel,
2 × LED (network connection, data transfer) on the rear
panel
Thermal value 13 BTU/h max.
Operating conditions Temperature: 0 to +60 °C / +32 to +140 °F
relative humidity: 0 to 95%, non-condensing
Approvals IEC 60950-1; UL-listed; EN 50130-4; EN 50121-4;
EN 55103-1; EN 55022 Class B; EN 55024; EN 61000-3-2;
EN 61000-3-3; FCC 47 CFR Part 15 Subpart B Class B;
AS/NZS 3548 Class B