Bosch VIP-X1XF Installation And Operating Manual Download Page 106

Page: 106 / 132

106

en | Operation

VIP X1 XF

DOC | V4.54 | 2011.09

Installation and Operating Manual

Bosch Sicherheitssysteme GmbH

6.9

Hardware connections between video servers

A VIP X1 XF with a camera connected to it can be used as a sender and a compatible hardware

decoder (such as the VIP XD) with a connected monitor as a receiver using an Ethernet

network connection. In this way it is possible to cover long distances without the need for

major installation or cabling work.

Installation

Compatible video servers are designed to connect to one another automatically, provided

they are correctly configured. They only need to be part of a closed network. Proceed as

follows to install the units:

Connect the units to the closed network using Ethernet cables.

Connect them to the power supply.

Connecting

There are three options for establishing a connection between a sender and a compatible

receiver in a closed network:

–

an alarm,

–

a terminal program, or

–

Internet Explorer.

Connecting on alarm

With the appropriate configuration, a connection between a sender and a receiver is made

automatically when an alarm is triggered (see

Section 5.27 Advanced Mode: Alarm Connections,

page 61

). After a short time the live video image from the sender appears on the connected

monitor.

This option can also be used to connect a sender and a compatible receiver using a switch

connected to the alarm input. You do not need a computer to make the connection in this

case.

NOTICE!

The sender and receiver must be located in the same subnet to establish a hardware

connection.

NOTICE!

Make sure that the units are configured for the network environment and that the correct IP

address for the remote location to be contacted in the event of an alarm is set on the

Alarm

Connections

configuration page (see

Section 5.27 Advanced Mode: Alarm Connections,

page 61

NOTICE!

Connecting with a Web browser is described in the manual of the relevant unit that is to be

used as the receiver, for example VIP XD.

Summary of Contents for VIP-X1XF





































































































































Search results

Summary of Contents for VIP-X1XF

Reviews:

Related manuals for VIP-X1XF

Brands by name

Popular brands

Bosch VIP-X1XF, Installation And Operating Manual

Search results

Summary of Contents for VIP-X1XF

Reviews:

Related manuals for VIP-X1XF

Brands by name

Popular brands