Bosch VG5 800 SERIES Installation Manual Download Page 91

Page: 91 / 123

AutoDome 800 Series HD PTZ Camera

Configuring the AutoDome 800 Series | en

Bosch Security Systems, Inc.

Installation Manual

F.01U.273.797 | 5.0 | 2012.08

7.32

Advanced Mode: Recording

7.33

Storage Management

You can record the images from the AutoDome 800 Series on various local storage media or

on an appropriately configured iSCSI system.

It is also possible to let the VRM Video Recording Manager control all recording when

accessing an iSCSI system. This is an external program for configuring recording tasks for

video servers. For further information please contact your local customer service at Bosch

Security Systems, Inc.

Device manager

If you activate the

VRM

option in this screen, the VRM Video Recording Manager will manage

all recording and you will not be able to configure any further settings here.

Recording media

Select the required recording media here so that you can then activate them and configure

the recording parameters.

iSCSI Media

If you want to use an

iSCSI system

as a recording medium, you must set up a connection to

the required iSCSI system and set the configuration parameters.

Enter the IP address of the required iSCSI destination in the

iSCSI IP address

field.

If the iSCSI destination is password protected, enter this into the

Password

field.

Click the

Read

button. The connection to the IP address will be established. In the

Storage overview

field, you can see the corresponding logical drives.

Local Media

The supported local recording media are displayed in the Storage overview field.

Activating and Configuring Storage Media

The storage overview displays the available storage media. You can select individual media or

iSCSI drives and transfer these to the

Managed storage media

list. You can activate the

storage media in this list and configure them for storage.

In the

Recording media

section, click the

iSCSI Media

and

Local Media

tabs to display

the applicable storage media in the overview.

In the

Storage overview

section, double-click the required storage medium, an iSCSI

LUN or one of the other available drives. The medium is then added to the

Managed

CAUTION!

Activating or deactivating VRM causes the current settings to be lost; they can only be

restored through reconfiguration.

NOTICE!

The iSCSI storage system selected must be available on the network and completely set up.

Amongst other things, it must have an IP address and be divided into logical drives (LUN).

CAUTION!

Each storage medium can only be associated with one user. If a storage medium is already

being used by another user, you can decouple the user and connect the drive with the

AutoDome 800 Series. Before decoupling, make absolutely sure that the previous user no

longer needs the storage medium.

Summary of Contents for VG5 800 SERIES




























































































































Search results

Summary of Contents for VG5 800 SERIES

Reviews:

Related manuals for VG5 800 SERIES

Brands by name

Popular brands

Bosch VG5 800 SERIES, Installation Manual

Search results

Summary of Contents for VG5 800 SERIES

Reviews:

Related manuals for VG5 800 SERIES

Brands by name

Popular brands