AutoDome 800 Series HD PTZ Camera
Configuring the AutoDome 800 Series | en
105
Bosch Security Systems, Inc.
Installation Manual
F.01U.273.797 | 5.0 | 2012.08
–
Remote Input 1
Relay Name
You can assign a name for the relay here. The name is shown on the button next to
Trigger
relay
. The Livepage can also be configured to display the name under the relay icon. You can
also use the name in the Forensic Search program function as a filter option for quick search
in recordings. Enter a unique and clear name here.
Trigger Relay
Click the
Relay 1
button to test the relay connection.
7.48
Advanced Mode: Network
7.49
Network Access
The settings on this page are used to integrate the AutoDome 800 Series into an existing
network.
Some changes only take effect after the unit is rebooted. In this case, the
Set
button changes
to
Set and Reboot
.
1.
Make the desired changes.
2.
Click the
Set and Reboot
button. The AutoDome 800 Series is rebooted and the changed
settings are activated.
Automatic IP assignment
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you
can activate acceptance of IP addresses automatically assigned to the AutoDome 800 Series.
Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration
Manager) use the IP address for the unique assignment of the unit. If you use these
applications, the DHCP server must support the fixed assignment between IP address and
MAC address, and must be appropriately set up so that, once an IP address is assigned, it is
retained each time the system is rebooted.
7.49.1
IPv4
IP address
Enter the desired IP address for the AutoDome 800 Series in this field. The IP address must
be valid for the network.
Subnet mask
Enter the appropriate subnet mask for the selected IP address here.
Gateway address
If you want the unit to establish a connection to a remote location in a different subnet, enter
the IP address of the gateway here. Otherwise leave the box blank (
0.0.0.0
).
CAUTION!
Do not use any special characters, for example
&
, in the name.
CAUTION!
If you change the IP address, subnet mask or gateway address, the AutoDome 800 Series is
only available under the new addresses after the reboot.
Summary of Contents for VG5 800 SERIES
Page 1: ...AutoDome 800 Series HD PTZ Camera VG5 800 Series en Installation Manual ...
Page 2: ......
Page 122: ......
