AutoDome 800 Series HD PTZ Camera
Configuring the AutoDome 800 Series | en
75
Bosch Security Systems, Inc.
Installation Manual
F.01U.273.797 | 5.0 | 2012.08
Password
The AutoDome 800 Series operates with three authorization levels:
service
,
user
and
live
.
The highest authorization level is
service
. After entering the correct password, you can access
all the functions of the AutoDome 800 Series and change all configuration settings.
With the
user
authorization level, you can operate the unit and also control cameras, for
example, but you cannot change the configuration.
The lowest authorization level is
live
. It can only be used to view the live video image and
switch between the different live image displays.
You can define and change a password for each authorization level if you are logged in as
service
or if the unit is not password protected.
Enter the password for the appropriate authorization level here.
Confirm password
In each case, enter the new password a second time to eliminate typing mistakes.
7.11
Date/Time
Date format
Select your required date format.
Device date/Device time
If there are multiple devices operating in your system or network, it is important to
synchronize their internal clocks. For example, it is only possible to identify and correctly
evaluate simultaneous recordings when all units are operating on the same time.
1.
Enter the current date. Since the unit time is controlled by the internal clock, there is no
need to enter the day of the week – it is added automatically.
2.
Enter the current time or click the
Sync to PC
button to copy your computer's system
time to the AutoDome 800 Series.
Device time zone
Select the time zone in which your system is located.
Daylight saving time
The internal clock can switch automatically between normal and daylight saving time (DST).
The unit already contains the data for DST switch-overs up to the year 2018. You can use
these data or create alternative time saving data if required.
NOTICE!
Proper password protection is only guaranteed when all higher authorization levels are also
protected with a password. If a
live
password is assigned, for example, a
service
and a
user
password must also be set. When assigning passwords, you should therefore always start
from the highest authorization level,
service
, and use different passwords.
NOTICE!
A new password is only saved when you click the
Set
button. You should therefore click the
Set
button immediately after entering and confirming a password.
NOTICE!
If you do not create a table, there will be no automatic switching. When changing and clearing
individual entries, remember that two entries are usually related to each other and dependent
on one another (switching to summer time and back to normal time).
Summary of Contents for VG5 800 SERIES
Page 1: ...AutoDome 800 Series HD PTZ Camera VG5 800 Series en Installation Manual ...
Page 2: ......
Page 122: ......
