Bosch VG5 600 Series, Installation Manual

Page: 3 / 88

AutoDome 600 Series Analog PTZ Camera Table of Contents | en 3
Bosch Security Systems, Inc. Installation Manual F.01U.265.793 | 2.0 | 2012.02
Table of Contents
1 Safety 6
1.1 Important Safety Instructions 6
1.2 Safety Precautions 8
1.3 Important Notices 8
1.4 Customer Support and Service 12
2 Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts 13
2.1 Unpacking 13
2.1.1 Parts List 13
2.1.2 Description 14
2.1.3 Tools Required 14
2.2 Pre-installation Checklist 14
2.3 Mount Power Supply Box 15
2.4 Route Wires and Attach Connectors 16
2.4.1 Coaxial Cable Connections 17
2.4.2 Make the Connections 17
2.4.3 Power Supply Box Connections 20
2.5 Route Power through Intermediate Power Supply Box 21
2.6 Attach Pendant Arm to Power Supply Box 25
2.7 Make Connections in Power Supply Box 26
2.8 Installing the VG4-A-ARMPLATE 27
2.8.1 Attach the Pendant Arm to the Mounting Plate 29
2.8.2 Route and Connect Wires to a Power Supply Box 30
2.9 Prepare Pendant for Installation 32
2.10 Attach Pendant to Arm and Tighten 34
3 Installing the Roof Parapet and Pipe Mounts 36
3.1 Unpacking 36
3.1.1 Parts List 36
3.1.2 Description 36
3.1.3 Tools Required 36
3.2 Pre-installation Check List 37
3.3 Mount Power Supply Box 38
3.3.1 Attach Cover Door 39
3.4 Route Wires and Attach Connectors 40
3.4.1 Methods for Routing Wires 40
3.4.2 Wiring the Power Supply Box 42
3.4.3 Wiring the Fiber Optic Model 43
3.4.4 Power Supply Box Connections 44
3.5 Installing the VG4-A-9230 Roof Parapet Mount 45
3.6 Installing the VG4-A-9543 Pipe Mount 49
3.7 Wire the Pipe Interface Board 50
3.7.1 Wiring for Multiple AutoDomes 51
3.7.2 Connecting Wires to the Pipe Interface Board 51
3.8 Prepare Pendant for Installation 53
3.9 Attach Pendant to Pipe and Tighten 55