Bosch VG5 600 Series, Installation Manual

Page: 36 / 88

36 en | Installing the Roof Parapet and Pipe Mounts AutoDome 600 Series Analog PTZ Camera
F.01U.265.793 | 2.0 | 2012.02 Installation Manual Bosch Security Systems, Inc.
3 Installing the Roof Parapet and Pipe Mounts
3.1 Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the product's Parts List below are included. If any items are
missing, notify your Bosch Security Systems Sales or Customer Service Representative. Refer
to Section 1.4 Customer Support and Service, page 12 , for contact information.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
3.1.1 Parts List
The following table lists the optional parts you may need for attaching a Pendant to the Roof
Parapet and Pipe mount packages:
3.1.2 Description
Chapter 3 details how to install a VG5 AutoDome to a Roof Parapet or to a Pipe mount. Any
differences to the installation between these two mounting systems are noted. Refer to
Section 2 Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts if you are installing a
Pendant Arm to a Wall, Corner, or Mast (or pole) or refer to Section 4 Installing the In-Ceiling
Mount if you are mounting an In-ceiling AutoDome.
The VG4-A-9230 Series are stationary mounts intended for rooftop parapet vertical walls. They
are made of light weight aluminum with a corrosion-resistant finish and are used for all Bosch
AutoDome Cameras up to a rated load of 29 kg (64 lb). These mounts can be fitted to the
inside or outside of parapet walls and can swivel for ease of positioning and for servicing the
AutoDome.
3.1.3 Tools Required
– 5 mm Allen wrench (supplied)
– Small straight blade screwdrivers ~ 2.5 mm (0.1 in.) – 3.1 mm (1/8 in.)
– Medium straight blade screwdriver
– No. 1 and No. 2 Phillips screwdrivers
– Socket wrench and 9/16 in. socket
– Pipe Wrench
– Barrel connector (if installing a fiber optic model)
Mounting Options Part Numbers
Parapet (Roof) Mount with one of the following Power Supply Boxes: VG4-A-9230
– Power Supply Box with 120 VAC transformer
or 230 VAC transformer
VG4-A-PSU1
VG4-A-PSU2
Optional Flat Roof Mount Adapter for VG4-A-9230 Mount (not included) LTC 9230/01
Pipe Mount with one of the following Power Supply Boxes: VG4-A-9543
– Power Supply Box with transformer 120 VAC
or 230 VAC transformer
VG4-A-PSU1
VG4-A-PSU2