Bosch VG5 600 Series, Installation Manual

Page: 57 / 88

AutoDome 600 Series Analog PTZ Camera Installing the In-Ceiling Mount | en 57
Bosch Security Systems, Inc. Installation Manual F.01U.265.793 | 2.0 | 2012.02
4 Installing the In-Ceiling Mount
4.1 Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the product's Parts List below are included. If any items are
missing, notify your Bosch Security Systems Sales or Customer Service Representative. Refer
to Section 1.4 Customer Support and Service, page 12 , for contact information.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
4.1.1 Parts List
The following table lists the parts included with the In-ceiling mount packages.
4.1.2 Description
This chapter details how to install the AutoDome in an In-Ceiling Mount. The In-Ceiling
AutoDome camera is suitable for use in environmental air spaces. Refer to Section 2 Installing
the Pendant Arm Wall, Corner, and Mast (Pole) Mounts , or refer to Section 3 Installing the Roof
Parapet and Pipe Mounts for these specific installations.
4.1.3 Tools Required
– Straight slot screwdrivers ~ 2.5 mm (0.1 inch) – 3.1 mm (1/8 inch)
– No. 2 Phillips screwdriver
– Appropriate tool for cutting a hole in drywall or ceiling tile
– Pliers
NOTICE!
If your application of the VG5 Series AutoDome in-ceiling mount is required to meet the IP54
environmental rating you must obtain the optional VGA-IP54K-IC Gasket Kit and follow the
directions included with the kit.
In-ceiling Mount
Quantity Item Part Number
1 Interface Box VG4-S-BIM
1 Bracket Assembly Support Kit (separate purchase) LTC 9349MK or VGA-IC-SP